Race entry module with posts to be embedded

The entry module is designed to prevent animals, once they have entered the race, from turning back.
To do this, it is essential that the installation is put together in line with our instructions and using the correct panels.
The entry module is designed to be attached to the end of the forcing semi-circle and can be used as an entry to either the cattle handling or drafting race.

Module composition:
- 1 bare post Ø 102 mm to be embedded, height 2,13 m;
- 2 posts 1 direction Ø 102 mm to be embedded, height 2,13 m;
- 2 posts 2 directions at 90° Ø 102 mm to be embedded, height 2,13 m;
- 1 post 3 directions (face to face) Ø 102 mm to be embedded, height 2,13 m;
- 1 three-sided post Ø102 mm to be embedded, height 2,13 m;
- 2 sheeted straight panels with fixed bar, length 0.78 m x height 1.55 m, sheeted over 1.15 m;
- 1 straight sheeted panel with fixed bar, length 1 m x height 1.55 m, sheeted over 1.15 m;
- 2 sheeted straight panels with fixed bar, length 1.20 m x height 1.55 m, sheeted over 1.15 m;
- 1 spring lock kit with flange Ø 102 mm for sheeted panel;